configs

btop.conf (10365B)

---

 #? Config file for btop v.1.4.6
 
 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
 #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
 color_theme = "Default"
 
 #* If the theme set background should be shown, set to False if you want terminal background transparency.
 theme_background = true
 
 #* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
 truecolor = true
 
 #* Set to true to force tty mode regardless if a real tty has been detected or not.
 #* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
 force_tty = false
 
 #* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
 #* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
 #* Use whitespace " " as separator between different presets.
 #* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
 presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
 
 #* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
 #* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
 vim_keys = false
 
 #* Rounded corners on boxes, is ignored if TTY mode is ON.
 rounded_corners = true
 
 #* Use terminal synchronized output sequences to reduce flickering on supported terminals.
 terminal_sync = true
 
 #* Default symbols to use for graph creation, "braille", "block" or "tty".
 #* "braille" offers the highest resolution but might not be included in all fonts.
 #* "block" has half the resolution of braille but uses more common characters.
 #* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
 #* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
 graph_symbol = "braille"
 
 # Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
 graph_symbol_cpu = "default"
 
 # Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
 graph_symbol_gpu = "default"
 
 # Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
 graph_symbol_mem = "default"
 
 # Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
 graph_symbol_net = "default"
 
 # Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
 graph_symbol_proc = "default"
 
 #* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
 shown_boxes = "cpu mem net proc"
 
 #* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
 update_ms = 100
 
 #* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
 #* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
 proc_sorting = "cpu lazy"
 
 #* Reverse sorting order, True or False.
 proc_reversed = false
 
 #* Show processes as a tree.
 proc_tree = false
 
 #* Use the cpu graph colors in the process list.
 proc_colors = true
 
 #* Use a darkening gradient in the process list.
 proc_gradient = true
 
 #* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
 proc_per_core = false
 
 #* Show process memory as bytes instead of percent.
 proc_mem_bytes = true
 
 #* Show cpu graph for each process.
 proc_cpu_graphs = true
 
 #* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
 proc_info_smaps = false
 
 #* Show proc box on left side of screen instead of right.
 proc_left = false
 
 #* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
 proc_filter_kernel = false
 
 #* In tree-view, always accumulate child process resources in the parent process.
 proc_aggregate = false
 
 #* Should cpu and memory usage display be preserved for dead processes when paused.
 keep_dead_proc_usage = false
 
 #* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
 #* Select from a list of detected attributes from the options menu.
 cpu_graph_upper = "Auto"
 
 #* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
 #* Select from a list of detected attributes from the options menu.
 cpu_graph_lower = "Auto"
 
 #* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
 show_gpu_info = "Auto"
 
 #* Toggles if the lower CPU graph should be inverted.
 cpu_invert_lower = true
 
 #* Set to True to completely disable the lower CPU graph.
 cpu_single_graph = false
 
 #* Show cpu box at bottom of screen instead of top.
 cpu_bottom = false
 
 #* Shows the system uptime in the CPU box.
 show_uptime = true
 
 #* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
 show_cpu_watts = true
 
 #* Show cpu temperature.
 check_temp = true
 
 #* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
 cpu_sensor = "Auto"
 
 #* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
 show_coretemp = true
 
 #* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
 #* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
 #* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
 #* Example: "4:0 5:1 6:3"
 cpu_core_map = ""
 
 #* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
 temp_scale = "celsius"
 
 #* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
 base_10_sizes = false
 
 #* Show CPU frequency.
 show_cpu_freq = true
 
 #* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
 freq_mode = "first"
 
 #* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
 #* Special formatting: /host = hostname | /user = username | /uptime = system uptime
 clock_format = "%X"
 
 #* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
 background_update = true
 
 #* Custom cpu model name, empty string to disable.
 custom_cpu_name = ""
 
 #* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
 #* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
 disks_filter = ""
 
 #* Show graphs instead of meters for memory values.
 mem_graphs = true
 
 #* Show mem box below net box instead of above.
 mem_below_net = false
 
 #* Count ZFS ARC in cached and available memory.
 zfs_arc_cached = true
 
 #* If swap memory should be shown in memory box.
 show_swap = true
 
 #* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
 swap_disk = true
 
 #* If mem box should be split to also show disks info.
 show_disks = false
 
 #* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
 only_physical = true
 
 #* Read disks list from /etc/fstab. This also disables only_physical.
 use_fstab = true
 
 #* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
 zfs_hide_datasets = false
 
 #* Set to true to show available disk space for privileged users.
 disk_free_priv = false
 
 #* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
 show_io_stat = true
 
 #* Toggles io mode for disks, showing big graphs for disk read/write speeds.
 io_mode = true
 
 #* Set to True to show combined read/write io graphs in io mode.
 io_graph_combined = false
 
 #* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
 #* Example: "/mnt/media:100 /:20 /boot:1".
 io_graph_speeds = ""
 
 #* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
 net_download = 100
 
 net_upload = 100
 
 #* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
 net_auto = true
 
 #* Sync the auto scaling for download and upload to whichever currently has the highest scale.
 net_sync = true
 
 #* Starts with the Network Interface specified here.
 net_iface = ""
 
 #* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
 base_10_bitrate = "Auto"
 
 #* Show battery stats in top right if battery is present.
 show_battery = true
 
 #* Which battery to use if multiple are present. "Auto" for auto detection.
 selected_battery = "Auto"
 
 #* Show power stats of battery next to charge indicator.
 show_battery_watts = true
 
 #* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
 #* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
 log_level = "WARNING"
 
 #* Automatically save current settings to config file on exit.
 save_config_on_exit = true
 
 #* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
 nvml_measure_pcie_speeds = true
 
 #* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
 rsmi_measure_pcie_speeds = true
 
 #* Horizontally mirror the GPU graph.
 gpu_mirror_graph = true
 
 #* Set which GPU vendors to show. Available values are "nvidia amd intel"
 shown_gpus = "nvidia amd intel"
 
 #* Custom gpu0 model name, empty string to disable.
 custom_gpu_name0 = ""
 
 #* Custom gpu1 model name, empty string to disable.
 custom_gpu_name1 = ""
 
 #* Custom gpu2 model name, empty string to disable.
 custom_gpu_name2 = ""
 
 #* Custom gpu3 model name, empty string to disable.
 custom_gpu_name3 = ""
 
 #* Custom gpu4 model name, empty string to disable.
 custom_gpu_name4 = ""
 
 #* Custom gpu5 model name, empty string to disable.
 custom_gpu_name5 = ""